Previous
Next
Cyclone 4006ac
Ultra high pressure runway
rubber removal and paint removal
- Purpose built machine for runway rubber removal, eliminates costly truck chassis, gives best value for money
- Cyclone cleaning system provides highest improvement in runway friction values per US Army Corp of Engineers Field Evaluation
- Runway rubber removal up to 20,000 ft2 (858 m2) per hour
- Variable output pressure 6,000 to 40,000 psi (2,757 to 414 bar) for removal or cleaning
- Glass enclosed cab provides best visibility for safe operation on the runway
- Computer controlled operating system protects machine and surface from harm
| Cleaning Head Assembly | Permanently mounted, hydraulically controlled, multi-pivot point maneuverability. Cast aluminum housing, hydraulically driven rotation, fiberglass recovery tank. Belt-driven return pump. Stainless steel ultra high pressure components. Instantaneous recovery |
|---|---|
| Cleaning Attachment | Gas powered, remote paint removal head up to 300ft (91m) distance |
| Rubber Removal Head | 40in (1.01m) cast aluminum head with up to 34in (0.86m) cleaning path |
| Paint Removal Head | 24in (60.96cm) cast iron with adjustable 6in (15.24cm) to 16in (40.64cm) cleaning path |
| Productivity (Rubber) | Up to 20,000ft² (1,858m2) per hour |
| Productivity (Paint) | Up to 10,000 linear feet (3048 meters) per hour |
| Filtration System | Inlet water filtered to 0.35 micron over 260 ft² of organic and particulate filtration |
| Water Filters | Minimum of two (2) filters before UHP pump: One (1) organic 50 micron filter, one (1) particle 0.35-micron filter |
| Water Pump | Positive displacement triplex plunger, with full pressurized lubrication, water cooled, 5.7gal (21.6L) per minute @ 40,000psi, 22.6 L/ min. @ 2,758 bar, variable output from 6,000 psi (413 bar) to 40,000 psi (2,758 bar) |
| Fresh Water Tank | 1,600gal (6,000L) corrosion resistant fiberglass |
| Reclaim Tank | Sand blasted and powder coated stainless steel. (Available in carbon or stainless steel). Separates water from material. 2,100gal (7,949L) total capacity. Powered dump with powered door for easy maintenance |
| Chassis | 10in (0.25m) x 3in (0.08m) x 1⁄4in (0.0064m) wall cold rolled steel tubing frame on a 23,000lb (10,433kg) rear axle and a 20,000lb (9,072kg) front axle |
| Operating System | Foot pedal controlled hydrostatic drive |
| Controls | Automated cleaning controls. Computer monitored safety and maintenance system with automatic shutdown |
| Speeds | Variable operating speeds and transport speed up to 18mph (28.9km/h) |
| Brakes | Air brakes, front and rear automatically adjusted 4 wheel drum brakes |
| Dimensions | L = 30ft (9.14m) x W = 8ft (2.44m) x H = 10ft (3.05m) |
| Fuel Tank | 100gal (379L) total fuel capacity |
| Gross Vehicle Weight Rating | 56,000 lbs (25,454 kg) |
| Steering | Hydraulic power steering |
| Power Plant Engine | 9.0L Power Tech Interim Tier 4 / Stage III B, 375hp turbocharged liquid cooled diesel engine |
| Pump Safety | Pressure relief burst disk will relieve all pressure if there is an increase of 7% above maximum recommended operating pressure |