Cyclone 4006HT

Ultra high pressure runway
rubber and paint removal

  • Large over-the-road truck integrated system gives best mobility to job site
  • Large water capacity, 1600 gal (6000 l) extends run time over 5 hours of continuous cleaning
  • Cyclone cleaning system fully recovers waste water without loud/noisy vacuum system
  • Adjustable paint line cleaning path from 6 to 16 inches (15 to 41 cm)
  • Joystick control provides precise placement of cleaning head on surface
Cleaning Head AssemblyRemovable, joystick controlled, multi-pivot point maneuverability. Cast aluminum housings, hydraulically driven rotation, fiberglass recovery tank. Belt-driven return pump. Each head max work pressure is 40,000 psi (2,700 bar) at 6 gpm (21L/min) Each head has a separate return tank and filtration screen
Rubber Removal Head40in (1.01m) cast aluminum head with up to 34in (0.86m) cleaning path
Paint Removal Head24in (60.96cm) cast iron with adjustable 6in (15.24cm) to 16in (40.64cm) cleaning path
Productivity (Rubber)Up to 20,000ft2
(1,858m2
) per hour
Productivity (Paint)Up to 10,000 linear feet (3048 meters) per hour
Filtration SystemInlet water filtered to 0.35 micron over 260ft2
(24m2
) of organic and particulate filtration
Water FiltersMinimum of two (2) filters before UHP pump: One (1) organic 50 micron filter, one (1) particle 0.35-micron filter
Water PumpPositive displacement triplex plunger, with full pressurized lubrication, water cooled, 5.7gal (21.6L) per minute @ 40,000 psi (2,758 bar), variable output from 6,000 psi (413 bar) to 40,000 psi (2,758 bar)
Fresh Water TankFresh water capacity: 1,600gal (6,000L) standard. Available up to 2,200 gal (8,327L) for 6.5 hours of operating time
Reclaim TankSeparates water from material. 2,000gal (7,570L) total capacity. Sand blasted and powder coated stainless steel. Carbon steel tank is painted with polyurethane paint. Powered dump with powered door for easy maintenance
ChassisThird party chassis available (MACK is shown in picture). 6X4 style, GVWR 57,320lbs (26,000kg)
Operating SystemCreep drive. Independent cooling/radiator, package. Travel in drive or hydrostatic mode. Cleaning mode: Engine operates at 1,550RPM
ControlsAutomated cleaning controls. Computer monitored safety and maintenance system with automatic shutdown
SpeedsCleaning speed: Up to 3.7mph (6km/hr), transport speed: Up to 65mph (105km/hr)
BrakesAir brakes, front and rear automatically adjusted 6 wheel drum brakes
Dimensions(Dimensions with cleaning heads retracted): 34ft 4in L x 8ft W x 11ft 6in H (10.5m x 2.4m x 3.5m)
Fuel TankUp to 105 gal (400L) total fuel capacity
Gross Vehicle Weight RatingUp to 72,600 lbs (33,000 kg)
SteeringPower Steering
Power Plant EngineTurbocharged liquid cooled diesel engine or equivalent
Pump SafetyPressure relief burst disk will relieve all pressure if there is an increase of 7% above maximum recommended operating pressure